Buy Cheap Pro-Quality 20-Piece Diamond-Point Bit Set for Rotary Tool - Glass, Stone, Ceramic From Here Now!
Professional Quality, 1/8" Shank, 180 Grit. Includes 20 assorted shapes covered with diamond particles. All bits have 1/8" shanks and come in convienient plastic holder. Excellent for fine detail work, cutting, engraving, carving, touch-up and finishing. Use on wood, jade, ceramic, glass, hardened steel, semi-precious stones and other hard materials.
Readmore
Technical Details
- Made In ChinaSee more technical details
By JMTRELLA (guilford, ct USA)
I tried to drill sea glass, the 1st 2 bits "melted" and mushroomed. The next 4 attempts broke the pieces and didn't even drill 1/16" deep.
By L. Ballard (Utah)
The first one I used went dull in about 20 seconds. It barely left a mark on the glass I was working with. The next one I used was on soft metal. Very unimpressive. You get what you pay for. Buy Ryobi drills if you want to grind through glass.
By Bleu Edee (Lander, WY USA)
I only used two of the bits so far. They worked wonderfully. I was able to use them in my Dremel just fine.
By Charlie Howard (Wine Country, USA)
This set of 20 bits costs less than one high-quality diamond bit from other sources, and the bits did the job for which they were purchased.
Used them to drill two 1/8 inch diameter holes in non-tempered window glass. This must be done slowly to avoid overheating and possibly fracturing the glass. Used several different bits to change shapes in the hope of making it go faster. When done, the holes were fine and all of the bits still seemed to have their abrasive surfaces.
I've read elsewhere that a high-quality diamond bit will last for perhaps three holes like these, and that it takes about two minutes to make one hole. Well, it took about 30 minutes per hole, but more than half of that time was spent pausing to let the glass and bit cool off. Since all of the bits still have diamond grit on them, it seems likely that they'll be able to make several more holes before wearing out.
NOTE: Tempered glass probably will shatter if drilled. This window didn't have a "tempered" logo in the corner and looked normal when viewed through polarized sunglasses.
By R. Fox
These generic diamond point bits work great on my dremel rotary tool and the price for 20 of them is cheaper than buying 1 bit of the dremel brand. I use them for engraving on glass and they have been great.
Images Product
Buy Pro-Quality 20-Piece Diamond-Point Bit Set for Rotary Tool - Glass, Stone, Ceramic Now
Buy Pro-Quality 20-Piece Diamond-Point Bit Set for Rotary Tool - Glass, Stone, Ceramic |
Cheap Pro-Quality 20-Piece Diamond-Point Bit Set for Rotary Tool - Glass, Stone, Ceramic | Low Price Pro-Quality 20-Piece Diamond-Point Bit Set for Rotary Tool - Glass, Stone, Ceramic | Best Pro-Quality 20-Piece Diamond-Point Bit Set for Rotary Tool - Glass, Stone, Ceramic | Order Pro-Quality 20-Piece Diamond-Point Bit Set for Rotary Tool - Glass, Stone, Ceramic | Good Pro-Quality 20-Piece Diamond-Point Bit Set for Rotary Tool - Glass, Stone, Ceramic | Lowest Pro-Quality 20-Piece Diamond-Point Bit Set for Rotary Tool - Glass, Stone, Ceramic | Save Pro-Quality 20-Piece Diamond-Point Bit Set for Rotary Tool - Glass, Stone, Ceramic | Discount Pro-Quality 20-Piece Diamond-Point Bit Set for Rotary Tool - Glass, Stone, Ceramic | Purchase Pro-Quality 20-Piece Diamond-Point Bit Set for Rotary Tool - Glass, Stone, Ceramic | Shop Pro-Quality 20-Piece Diamond-Point Bit Set for Rotary Tool - Glass, Stone, Ceramic | Buying Pro-Quality 20-Piece Diamond-Point Bit Set for Rotary Tool - Glass, Stone, Ceramic | Where Pro-Quality 20-Piece Diamond-Point Bit Set for Rotary Tool - Glass, Stone, Ceramic
0 comments:
Post a Comment