Buy Cheap Dremel 570 1/8-Inch Carbide Grout Removal Bit From Here Now!
Replacement bit for grout removal attachment (Dremel model No. 568). Solid carbide tipped. No. 569: 1 16" carbide bit No. 570: 1 8" carbide bit
Readmore
Technical Details
- Ideal for replacing wall and floor grout or removing grout to replace broken tiles- Removes grout 3/8-inch below the face surface
- Made of steel
- Designed for use with Dremel No. 568 and 962-01 grout removal attachments
- Measures 1/8-inch in diameter
See more technical details
By S. Lakatos (Portland, OR USA)
I purchased both the Dremel 569 and 570 carbide grout removal bits to perform what I thought would be a fairly straightforward removal of old grout from our bathtub tiling. The bits work very well for about 15 minutes (i.e., about 7-8 linear feet of grout) and then go dull to the point that the bit refuses to cut anymore and the tip glows red hot even with slight pressure. I am now on my 14th bit and I still have about 15 feet of grout to remove. Given that these bits sell for between $11 and $15, this is a ridiculously short bit life for what is relatively soft gypsum material; it's not like I'm trying to cut through concrete or sheet metal. I've tried every possible technique, including cooling the bit down for a minute after each foot of grout removal, but nothing extended the life of the bit by much. Moreover, although I'm not a professional contractor, I have about three decades of experience with power tools, so I'm pretty confident I'm not using the bits in a manner that would be outside their performance scope. Dremel really needs to either drop the price of these bits to a couple of bucks and bundle them by the dozen, or upgrade the quality so that it actually is worth the current asking price. No one should have to pay close to $200 in grout removal bits for a simple, straightforward residential bathroom grouting job.
By chad
I managed to get about 6 inches of grout removed and then the cutter was so dull it stopped cutting grout. Very dissapointing. I ended up using a $2 hand grout removal tool tot cut through the grout on the 5 tiles I was removing.
By B. Bates (Santa Fe, NM USA)
Could have been made tougher. It does the job, until it breaks. And it will break sooner or later.
By M. Johnson
I was a bit skeptical about the 570, however that skepticism is gone after watching this bit chew through grout like a hot knife through butter.
By Theadore E. Inness (Las Vegas, NV USA)
Great and durable bit for grout removal and other things where a 1/8th" slot or hole is desirable - anywhere carbide will do the job this is it.
Images Product
Buy Dremel 570 1/8-Inch Carbide Grout Removal Bit Now
Buy Dremel 570 1/8-Inch Carbide Grout Removal Bit |
Cheap Dremel 570 1/8-Inch Carbide Grout Removal Bit | Low Price Dremel 570 1/8-Inch Carbide Grout Removal Bit | Best Dremel 570 1/8-Inch Carbide Grout Removal Bit | Order Dremel 570 1/8-Inch Carbide Grout Removal Bit | Good Dremel 570 1/8-Inch Carbide Grout Removal Bit | Lowest Dremel 570 1/8-Inch Carbide Grout Removal Bit | Save Dremel 570 1/8-Inch Carbide Grout Removal Bit | Discount Dremel 570 1/8-Inch Carbide Grout Removal Bit | Purchase Dremel 570 1/8-Inch Carbide Grout Removal Bit | Shop Dremel 570 1/8-Inch Carbide Grout Removal Bit | Buying Dremel 570 1/8-Inch Carbide Grout Removal Bit | Where Dremel 570 1/8-Inch Carbide Grout Removal Bit
0 comments:
Post a Comment