Saturday, September 25, 2010

0 Dremel 7700-02 MultiPro 7.2-Volt 20,000 RPM Two-Speed Rotary Tool with 50 Accessories

Review Dremel 7700-02 MultiPro 7.2-Volt 20,000 RPM Two-Speed Rotary Tool with 50 Accessories


Buy Cheap Dremel 7700-02 MultiPro 7.2-Volt 20,000 RPM Two-Speed Rotary Tool with 50 Accessories From Here Now!

Dremel 7.2V Cordless Multipro Rotary Tool
  • 2 Speed 7,500/15,000 Rpm
  • Provides Versatility Anywhere
  • Ball Bearing Motor Design
  • Includes Charger
  • 25 Accessories & Molded Case
    Readmore

    Technical Details

    - Cordless rotary tool with 50 accessories; 7.2-volts; two speeds (5,000 and 10,000 rpm)
    - Ball-bearing shaft for smooth, low-vibration operation; bit changes with no wrench
    - Lightweight, durable plastic housing
    - Includes rotary tool, 50 accessories, 3-hour charger, case
    - Lightweight 9-ounces; 2-year warranty
    See more technical details
    Customer Buzz
     "Regret" 2010-08-13
    By Peeved Zen Owner
    Regret is all I can say. First and biggest complain is that the On/Low/High switch is complete garbage. It never locks into place and i often jump from low to high speed, right past off when trying to shut it off.



    The battery never tightly locks into place either..it's always a slight bump from coming off.



    Battery life is very short, but that's not all that surprising.



    Last Dremel name brand i ever buy again.

    Customer Buzz
     "Awesome for trimming large dog nails!!!" 2010-07-24
    By S. Stone (Mid Missouri)
    After our last trip to the vet, I knew I finally had to find an alternative to nail clippers. My 100-pound St. Bernard/Lab mix has very thick black nails, so they are difficult to trim. Our vet started to cut, and almost immediately my dog was yelping in pain from the pinching pressure of the clippers, and several cut quicks. A very unpleasant experience for all of us.

    I did some searching on Amazon and came across the Dremel 761-03 Pet Grooming Tool. After reading customer reviews, I decided to buy the 7700-02 instead. It's perfect!!

    At first my dog was very nervous, so I gave her lots of praise and small treats, until she was used to the noise. Then I moved on to sanding one nail at a time, followed by a small treat. Now when she sees the Dremel, she gets exited and happily lays down for her manicure! The sanding creates a lot of nail dust, and tiny chips can shoot through the air, so you'll want to do this outside and wear protective eye wear.

    This tool is very lightweight and easy to maneuver. I wish I would have done this years ago! If your dog has large nails, this is the tool for you!





    Customer Buzz
     "Missing 14 Cutting heads. Check yours!" 2010-05-29
    By AmazonBuyer (Texas)
    First, this was my mistake not to check/count the 50 accesories when I got the order.

    I needed a tool to groom my small dogs' nails and decided to purchased this more powerful tool so that I could it for other uses 19 monhts ago.

    Now I want to use this to cut a metal and while reading the manual I found that the package should have 50 accesories, which includes 15 of cutting heads (#409) and 2 of #420, but apparently there are only 2 of #409 and 1 of #420 in the box.

    I know I did not loose them because I only used them a few times and kept them well in my office.



    I am so disappointed that the package misseed many of them.

    I like the tool very much but determine to post and give it 3 stars for missing many (14) items.

    So it would be worth to check your inventory that you have the complete 50 accessories.

    Customer Buzz
     "Great for large dogs" 2010-05-13
    By B.A. (Kingston, NY United States)
    I have 4 english mastiffs and this grinder works great. My only complaint is that I wish the battery lasted longer. Grinding is MUCH preferable to using a clipper and it's fairly easy to teach the dog to allow its use. I always dreaded cutting their nails, but no more. Just have lots of little treats handy so they associate the experience in a positive manner.

    Customer Buzz
     "MINOR FLAW, EASY FIX. 5 STARS" 2010-04-17
    By John H. Jordan Jr. (KY)
    Great and handy machine, but like others have said, Flawed!

    Battery connection doesn't hold tightly, causing the switch to sometimes malfunction, because of improper electrical contacts!

    One customer heated up the side contacts with a butane lighter & bent them in!

    He said it works up to it's full potential, after that!

    But as I said, THIS IS A GREAT TOOL!

    I wouldn't wanna risk using a LIGHTER" on it!

    So you see those "FLANGE SNAPS" that Holds the Battery on?

    There is a SPACE or POCKET, beneath or BEHIND Them!

    Get some Scissors and CELLOPHANE PACKING MATERIAL, FOAM or PAPER!

    AND CUT PIECES JUST BIG ENOUGH TO FIT THE SPACES BEHIND THE (2) "SNAPS".

    Works Great!

    No SWITCH problems!

    It is Now A GREAT TOOL!

    So for the minor Flaw!

    EASY FIX!

    AND THE PRICE" I have to give it (5) STARS!














    Images Product

    Buy Dremel 7700-02 MultiPro 7.2-Volt 20,000 RPM Two-Speed Rotary Tool with 50 Accessories Now
    Buy Dremel 7700-02 MultiPro 7.2-Volt 20,000 RPM Two-Speed Rotary Tool with 50 Accessories |
    Cheap Dremel 7700-02 MultiPro 7.2-Volt 20,000 RPM Two-Speed Rotary Tool with 50 Accessories | Low Price Dremel 7700-02 MultiPro 7.2-Volt 20,000 RPM Two-Speed Rotary Tool with 50 Accessories | Best Dremel 7700-02 MultiPro 7.2-Volt 20,000 RPM Two-Speed Rotary Tool with 50 Accessories | Order Dremel 7700-02 MultiPro 7.2-Volt 20,000 RPM Two-Speed Rotary Tool with 50 Accessories | Good Dremel 7700-02 MultiPro 7.2-Volt 20,000 RPM Two-Speed Rotary Tool with 50 Accessories | Lowest Dremel 7700-02 MultiPro 7.2-Volt 20,000 RPM Two-Speed Rotary Tool with 50 Accessories | Save Dremel 7700-02 MultiPro 7.2-Volt 20,000 RPM Two-Speed Rotary Tool with 50 Accessories | Discount Dremel 7700-02 MultiPro 7.2-Volt 20,000 RPM Two-Speed Rotary Tool with 50 Accessories | Purchase Dremel 7700-02 MultiPro 7.2-Volt 20,000 RPM Two-Speed Rotary Tool with 50 Accessories | Shop Dremel 7700-02 MultiPro 7.2-Volt 20,000 RPM Two-Speed Rotary Tool with 50 Accessories | Buying Dremel 7700-02 MultiPro 7.2-Volt 20,000 RPM Two-Speed Rotary Tool with 50 Accessories | Where Dremel 7700-02 MultiPro 7.2-Volt 20,000 RPM Two-Speed Rotary Tool with 50 Accessories

  • Thursday, September 23, 2010

    0 Dremel 4486 MultiPro Keyless Chuck

    Review Dremel 4486 MultiPro Keyless Chuck


    Buy Cheap Dremel 4486 MultiPro Keyless Chuck From Here Now!

    4486 This item features: -Use only with corded and cordless MultiPro rotary tool models 275, 285, 395, 575, 780 and Digital rotary tool 398.. -Clamp Diam: 1/32 in [Min], 1/8 in [Max]. -Type: Chuck. -Price is for 1 Each.
    Readmore

    Technical Details

    - Chuck allows quick and easy accessory changes without changing collets
    - Accepts accessories with 1/32-Inch to 1/8-Inch shanks
    - For use with DREMEL rotary tool models 275, 285, 395, 398, 750, 770 and 781
    See more technical details
    Customer Buzz
     "Works like supposed to" 2010-08-27
    By Mountainman 57 (Nolensville, TN USA)
    I use with most of my tools without a wrench. Much faster than using collets.

    Customer Buzz
     "good attachment" 2010-08-26
    By kookie
    If you own a B&d rotary tool this work perfect. I've seen some review that this actually don't work on dremel itself. But it will on other rotary brands..THanks dremel now i'm loving my B&D rotary..

    Customer Buzz
     "Replacement Chuck" 2010-08-16
    By Cary M. Sagady
    This replacement is not as robust and heavy as the original from 10 years ago (reason I gave it 4 stars), but it worked just fine. Looks like it will not fit at first, however the shaft threads match. Not much to comment on...holds bits as good as the original. Go ahead and buy one.

    Customer Buzz
     "Dremel Chuck" 2010-08-04
    By Cheryl M Collins (Springfield, Missouri, US)
    This little chuck , may I saw has gotten more use , I really like the idea you do not have to use a wrench to turn this to change bits . Quick and easy .

    Customer Buzz
     "Won't fit on a flexshaft attachment" 2010-07-24
    By Dianes1717
    I haven't used this accessory because it can not be used with the flexable shaft. Didn't think of that when I ordered it.


    Images Product

    Buy Dremel 4486 MultiPro Keyless Chuck Now
    Buy Dremel 4486 MultiPro Keyless Chuck |
    Cheap Dremel 4486 MultiPro Keyless Chuck | Low Price Dremel 4486 MultiPro Keyless Chuck | Best Dremel 4486 MultiPro Keyless Chuck | Order Dremel 4486 MultiPro Keyless Chuck | Good Dremel 4486 MultiPro Keyless Chuck | Lowest Dremel 4486 MultiPro Keyless Chuck | Save Dremel 4486 MultiPro Keyless Chuck | Discount Dremel 4486 MultiPro Keyless Chuck | Purchase Dremel 4486 MultiPro Keyless Chuck | Shop Dremel 4486 MultiPro Keyless Chuck | Buying Dremel 4486 MultiPro Keyless Chuck | Where Dremel 4486 MultiPro Keyless Chuck

    0 Dremel Attachments & Accessories Collection

    Review Dremel Attachments & Accessories Collection


    Buy Cheap Dremel Attachments & Accessories Collection From Here Now!


    Readmore

    Technical Details

    See more technical details

    Images Product

    Buy Dremel Attachments & Accessories Collection Now
    Buy Dremel Attachments & Accessories Collection |
    Cheap Dremel Attachments & Accessories Collection | Low Price Dremel Attachments & Accessories Collection | Best Dremel Attachments & Accessories Collection | Order Dremel Attachments & Accessories Collection | Good Dremel Attachments & Accessories Collection | Lowest Dremel Attachments & Accessories Collection | Save Dremel Attachments & Accessories Collection | Discount Dremel Attachments & Accessories Collection | Purchase Dremel Attachments & Accessories Collection | Shop Dremel Attachments & Accessories Collection | Buying Dremel Attachments & Accessories Collection | Where Dremel Attachments & Accessories Collection

    0 Dremel 697-06 150-Piece Rotary Tool Super-Accessory Assortment

    Review Dremel 697-06 150-Piece Rotary Tool Super-Accessory Assortment


    Buy Cheap Dremel 697-06 150-Piece Rotary Tool Super-Accessory Assortment From Here Now!

    No need to buy those Dremel accessories piecemeal, this kit contains 150 rotary tool attachments for cutting, grinding, sanding, polishing, drilling, sharpening, cleaning, and more! With five aluminum and silicone grinding stones, two polishing wheels, sanding discs, drums, bands, and mandrels, plus cut-off wheels large and small, you’ll be fully armed for any maintenance project, craft challenge, or repair that comes your way. The tool box keeps accessories organized for easy access. --Brian D. Olson

    What’s in the Box

  • High-Speed Cutter
  • 1 - 405 Brush Cup
  • 1 - 428 1/2-inch Felt Polishing Wheel
  • 9 - 414 1/2-inch Felt Polishing Wheel
  • 1 - 802 Plastic Polishing Compound
  • 1 - 429 Felt Wheel
  • 1 - 407 60 grit Sanding Drum & Mandrel
  • 4 - 408 60 grit Sanding Bands
  • 24 - 411A Coarse Sanding Discs
  • 24 - 412 Sanding Discs
  • 24 - 413 Sanding Discs
  • 20 - 409 Cut-off Wheels
  • 4 - 432 1/2-inch 120 grit Sanding Bands
  • 1 - 150 1/2-inch Drill Bit
  • 2 - 401 Mandrel
  • 1 - 402 Mandrel
  • 1 - 90962 Wrench
  • 20 - 420 Heavy-duty Cut-Off Wheels
  • 5 - 426 1-1/4-inch Cut-off Wheels
  • 1 - 8193 5/8-inch Aluminum Oxide Grinding Stone
  • 1 - 84922 3/16-inch Silicone Carbide Grinding Stone
  • 1 - 85422 25/32-inch Silicone Carbide Grinding Stone
  • 1 - 932 3/8-inch Aluminum Oxide Grinding Stone
  • 1 - 952 3/8-inch Aluminum Oxide Grinding Stone
    Readmore

    Technical Details

    - 150-piece rotary tool accessory kit with handy organizer
    - Use with all Dremel rotary tools
    - Durable plastic storing case with transparent top for quick identification
    - Includes Tools for cutting, grinding, polishing, sanding, drilling, sharpening, cleaning, and more
    - 1-year warranty
    See more technical details
    Customer Buzz
     "Good Buy if Your Dremel Case Is Depleted" 2010-08-03
    By Tom D (Columbus, OH United States)
    This is a good buy if you don't use the EZ-Lock system and you've lost or damaged a lot of your basic tools. If you do a lot of a particular task, like polishing or metal cut off, you're better off buying just the pieces you need.



    I leave a Dremel at a shared cottage and last time I opened the case nothing was there but the Dremel and one arbor, so this is what I bought to re-establish the kit. Happy, and I'm locking it up.

    Customer Buzz
     "I like to keep it short" 2010-07-18
    By Nutz (NYC)
    An excellent expansion...on the accessories contained in a stock dremel kit.



    Points of interest:

    Large quantity of cutting/sanding/grinding wheels

    SOME very useful individual pieces.







    Points of contention:

    Part count includes many multiples of the same items. Im not so sure that everybody needs 3 dozen sanding discs.

    it would be nice if some of the more robust cutter accessories were included.

    oh god the case! what a poor use of space! luckily the part trays can be removed. eventually i shall relocate them.



    Customer Buzz
     "fantastic" 2010-06-28
    By Shirley R. Nichols
    Good buy I'm so glad I bought it in our small town it's hard to find dremel tools it been very handy to have

    Customer Buzz
     "Good Deal" 2010-04-14
    By Doug P. Seeger (Michigan)
    Product was exactly as explained and has just about everything you could need for a Dremel. This product will go great with a new Dremel. tool or at least give you basics that you can add to later. I recommend this to anyone looking into a new Dremel.

    Customer Buzz
     "Dremel Accessories" 2010-03-05
    By Winston G. Fullerton
    I am a DIY and this product is just the right one for some of the things that I have to do around the house


    Images Product

    Buy Dremel 697-06 150-Piece Rotary Tool Super-Accessory Assortment Now
    Buy Dremel 697-06 150-Piece Rotary Tool Super-Accessory Assortment |
    Cheap Dremel 697-06 150-Piece Rotary Tool Super-Accessory Assortment | Low Price Dremel 697-06 150-Piece Rotary Tool Super-Accessory Assortment | Best Dremel 697-06 150-Piece Rotary Tool Super-Accessory Assortment | Order Dremel 697-06 150-Piece Rotary Tool Super-Accessory Assortment | Good Dremel 697-06 150-Piece Rotary Tool Super-Accessory Assortment | Lowest Dremel 697-06 150-Piece Rotary Tool Super-Accessory Assortment | Save Dremel 697-06 150-Piece Rotary Tool Super-Accessory Assortment | Discount Dremel 697-06 150-Piece Rotary Tool Super-Accessory Assortment | Purchase Dremel 697-06 150-Piece Rotary Tool Super-Accessory Assortment | Shop Dremel 697-06 150-Piece Rotary Tool Super-Accessory Assortment | Buying Dremel 697-06 150-Piece Rotary Tool Super-Accessory Assortment | Where Dremel 697-06 150-Piece Rotary Tool Super-Accessory Assortment

  • Saturday, September 18, 2010

    0 Dremel 750-02 Minimite 4.8-Volt Two-Speed Cordless Rotary Tool

    Review Dremel 750-02 Minimite 4.8-Volt Two-Speed Cordless Rotary Tool


    Buy Cheap Dremel 750-02 Minimite 4.8-Volt Two-Speed Cordless Rotary Tool From Here Now!

    We started counting all the uses for this little dynamo, but we stopped at 967. We like it for delicate tasks and finer work because it isn't as powerful as its big brothers, so it's easier to control. It's light, extremely maneuverable, the switch is exactly where you want it and heck, it's just plain fun to use. It's perfect for jewelry, electronics, tiny woodworking crafts like dollhouse furniture and other intricate hobbies. It uses Dremel's wide array of bits, so there's virtually no limit to what you can do with this. Sure, there are store brands on the market for less, but Dremel is king when it comes to rotary tools, and we think they outdid themselves with this one.
    Readmore

    Technical Details

    - Cordless small rotary tool; compatible with Dremel bit accessories; 1/8-inch collet
    - Small rotary tool ideal for delicate tasks and finer work; 2 speeds (6,500- 13,000 rpm)
    - Lightweight plastic housing
    - Includes rotary tool, sanding drum, small felt wheel, fine sanding band, carbide stone
    - 8 inches long; 2 pounds; 2-year warranty
    See more technical details
    Customer Buzz
     "Dremel Sander -- Excellent product" 2010-08-29
    By James Seiler
    Meets all the expectations. Perfect for my needs. I use it to trim my dogs nails. Received quickly -- works fine. Could not be more pleased. (And so is my pet!)

    Customer Buzz
     "Minimite rotary tool" 2010-08-23
    By George R. Gavalas
    We are using this tool to file extra toenail thickness from fungus-infected toenails. It has saved me from this obstinate problem. By removing extra thickness, the toenail is relieved, infection is averted. I had one for 10 years before the motor gave up. I just bought a new more powerful one at the same cost.

    Customer Buzz
     "Pretty good little tool." 2010-08-21
    By Davejc
    The Dremel is great for sharpening chainsaws, very quick and easy to get use to. The only draw back with the Minimite is that for 3 hours charge you only get 20 minutes of use in the high speed mode.

    Customer Buzz
     "So much better than clippers!" 2010-08-19
    By chitownegrl (Chicago IL)
    I bought this on the advice of the groomer who cut her nails. My amazing and sweet Aussie and I adopted each other 12 years ago. For 3 years before that -Whoever- had her should be thrown in jail. Her nails were Never cut, quicks longer than you could ever imagine, but I won't get into that now! I had been taking her to groomers to have her nails professionally cut for Years. I just didn't trust myself to successfully do this. Well, she would still bleed, even with the pros. And I would get yelled at by the groomers for her nails being like that. Once I mentioned she came from a shelter...So I did tons of research and found this item. Fantastic! After all my baby went through and all that she was afraid of even years later, she did not mind the noise at all. What a gal! One thing I read that is good advice- somehow (pantyhose, etc) cover the paw, stick nails thru, so the fur does not get in the way. When it does get caught- watch out! I've been using it for I think about a year now at least 2x a month and just now I'm going to buy replacement pads. Highly recommend! Love the fact it is cordless, I'll never use a corded one again.

    Customer Buzz
     "So many uses to list!!" 2010-08-17
    By David Hogan (Fort Atkinson, WI USA)
    Best product of it's kind. The rechargable battery is very longlasting and works perfect even at the end of a charge. I'm finding new uses for it every week. From modifying my fishing tackle box by cutting out the plastic dividers to filing down my pets nails. So many attachments that you can't help but to find a use of one you see at the store. Very good price for the enjoyment I get from it!!


    Images Product

    Buy Dremel 750-02 Minimite 4.8-Volt Two-Speed Cordless Rotary Tool Now
    Buy Dremel 750-02 Minimite 4.8-Volt Two-Speed Cordless Rotary Tool |
    Cheap Dremel 750-02 Minimite 4.8-Volt Two-Speed Cordless Rotary Tool | Low Price Dremel 750-02 Minimite 4.8-Volt Two-Speed Cordless Rotary Tool | Best Dremel 750-02 Minimite 4.8-Volt Two-Speed Cordless Rotary Tool | Order Dremel 750-02 Minimite 4.8-Volt Two-Speed Cordless Rotary Tool | Good Dremel 750-02 Minimite 4.8-Volt Two-Speed Cordless Rotary Tool | Lowest Dremel 750-02 Minimite 4.8-Volt Two-Speed Cordless Rotary Tool | Save Dremel 750-02 Minimite 4.8-Volt Two-Speed Cordless Rotary Tool | Discount Dremel 750-02 Minimite 4.8-Volt Two-Speed Cordless Rotary Tool | Purchase Dremel 750-02 Minimite 4.8-Volt Two-Speed Cordless Rotary Tool | Shop Dremel 750-02 Minimite 4.8-Volt Two-Speed Cordless Rotary Tool | Buying Dremel 750-02 Minimite 4.8-Volt Two-Speed Cordless Rotary Tool | Where Dremel 750-02 Minimite 4.8-Volt Two-Speed Cordless Rotary Tool

    Thursday, September 16, 2010

    0 Dremel 755D 4-4/5-Volt MiniMite Battery Pack

    Review Dremel 755D 4-4/5-Volt MiniMite Battery Pack


    Buy Cheap Dremel 755D 4-4/5-Volt MiniMite Battery Pack From Here Now!

  • Dremel 3 hour Rechargeable Battery
  • Use with #750 Rotary Cordless Tool
  • Nickel-Cadmium
    Readmore

    Technical Details

    - Nickel-Cadmium
    - Long lasting
    See more technical details
    Customer Buzz
     "Obsolete - don't buy" 2010-08-23
    By Navy Chuck
    It took a long time to get this from the seller. The battery packs wouldn't take a charge. I called Dremel and found out the 755 and 756 products are now obsolete. Send your old items to Dremel with a small charge and they will give you an entire replacement tool, battery and charger.

    Customer Buzz
     "Works like all batteries" 2010-07-13
    By F. William Danby (Manchester, NH USA)
    Works like all batteries.

    Charge it.

    Snap it in place.

    Duh.

    ***** (Five Star) Review

    Customer Buzz
     "Good Product - Cheap Price - Fast Shipping" 2010-07-01
    By smoxen
    Good Product - Cheap Price - Fast Shipping - Will do more business here - smoxen

    Customer Buzz
     "Poor construction" 2009-12-29
    By Red (Dayton, Ohio)
    The item was not constructed well. It seems to work but had to be taken apart and reassembled correctly. The case was one backward. I can not recommend this product.

    Customer Buzz
     "Hard to find...except for Amazon, of course!" 2009-10-14
    By QOFE
    Love the ease of finding just what I'm looking for! I searched local retailers for an extra battery and none of them stocked it. They have all the other accessories, so why not the batteries!?!? Of course I ended up buying exta bits while shopping around; those are hard to choose online if you don't know what you want. Thank you, Amazon, for coming to the rescue once again!


    Images Product

    Buy Dremel 755D 4-4/5-Volt MiniMite Battery Pack Now
    Buy Dremel 755D 4-4/5-Volt MiniMite Battery Pack |
    Cheap Dremel 755D 4-4/5-Volt MiniMite Battery Pack | Low Price Dremel 755D 4-4/5-Volt MiniMite Battery Pack | Best Dremel 755D 4-4/5-Volt MiniMite Battery Pack | Order Dremel 755D 4-4/5-Volt MiniMite Battery Pack | Good Dremel 755D 4-4/5-Volt MiniMite Battery Pack | Lowest Dremel 755D 4-4/5-Volt MiniMite Battery Pack | Save Dremel 755D 4-4/5-Volt MiniMite Battery Pack | Discount Dremel 755D 4-4/5-Volt MiniMite Battery Pack | Purchase Dremel 755D 4-4/5-Volt MiniMite Battery Pack | Shop Dremel 755D 4-4/5-Volt MiniMite Battery Pack | Buying Dremel 755D 4-4/5-Volt MiniMite Battery Pack | Where Dremel 755D 4-4/5-Volt MiniMite Battery Pack

  • Wednesday, September 15, 2010

    0 Dremel 757-01 7.2-Volt MultiPro Battery

    Review Dremel 757-01 7.2-Volt MultiPro Battery


    Buy Cheap Dremel 757-01 7.2-Volt MultiPro Battery From Here Now!

    Removable 7.2V NiCd battery pack for use with Dremel MultiPro.
    Readmore

    Technical Details

    - For use with Dremel 7.2-Volt MultiPro cordless rotary tool models 7700-01 and 7700-02
    - 7.2-Volt of power for light duty precision jobs
    See more technical details
    Customer Buzz
     "Replacement Battery" 2010-07-05
    By
    My old battery finally died and this was the perfect replacement. It arrived in 1/2 the time qouted without paying extra shipping. Great service.

    Customer Buzz
     "New battery" 2010-04-08
    By Paula (Camas, WA)
    We use our Dremel a ton and had found the original battery was not holding a charge. We bought it about 2 years ago. My husband uses it for his hobby and I use it for trimming dog nails and I have four dogs. We were disappointed that the original one did not last longer but hopefully this one will last even longer.

    Customer Buzz
     "It works" 2010-03-15
    By Teresa Glover (Philadelphia, PA USA)
    What can I say? This fits the Dremel I use to sand my dogs' nails. My old battery died and they don't sell replacements at Home Depot or Lowe's (go figure?) so I ordered one from Amazon. It works just fine.

    Customer Buzz
     "Dremel Battery" 2009-08-26
    By Grandstan (Chatsworth, CA USA)
    Couldn't find this at the store where I bought the Dremel tool, so had to order online. Good thing, because the price was very reasonable. It works great!

    Customer Buzz
     "Best price we have found for this product." 2009-06-04
    By K. Nail Trimmers (Milwaukee, WI)
    We use the portable, battery operated Dremel drill that uses this battery. Amazon had the best price we could find for replacements. Make sure you look up info on care for these batteries. They have a memory and will last the longest if you run them down completely before your recharge them. This assures long running time and a long life. Our first batteries lasted about 3.5 years but would have lasted longer if we knew how to properly recharge them.


    Images Product

    Buy Dremel 757-01 7.2-Volt MultiPro Battery Now
    Buy Dremel 757-01 7.2-Volt MultiPro Battery |
    Cheap Dremel 757-01 7.2-Volt MultiPro Battery | Low Price Dremel 757-01 7.2-Volt MultiPro Battery | Best Dremel 757-01 7.2-Volt MultiPro Battery | Order Dremel 757-01 7.2-Volt MultiPro Battery | Good Dremel 757-01 7.2-Volt MultiPro Battery | Lowest Dremel 757-01 7.2-Volt MultiPro Battery | Save Dremel 757-01 7.2-Volt MultiPro Battery | Discount Dremel 757-01 7.2-Volt MultiPro Battery | Purchase Dremel 757-01 7.2-Volt MultiPro Battery | Shop Dremel 757-01 7.2-Volt MultiPro Battery | Buying Dremel 757-01 7.2-Volt MultiPro Battery | Where Dremel 757-01 7.2-Volt MultiPro Battery

    0 Dremel 456 1-1/2" Reinforced Rotary Tool Cut-Off Wheel - 10 Pack

    Review Dremel 456 1-1/2" Reinforced Rotary Tool Cut-Off Wheel - 10 Pack


    Buy Cheap Dremel 456 1-1/2" Reinforced Rotary Tool Cut-Off Wheel - 10 Pack From Here Now!

    Dremel?s biggest Cut-off Wheel allows you to cut more than ever before! It is made of a hard abrasive and reinforced with fiberglass for extra strength. The 1½ inch Cut-off Wheel is designed for use with a washer set that provides extra support. Each package includes 10 cut-off wheels and a washer set. It is ideal for cutting, grooving and trimming all kinds of materials including metal, wood and ceramics. Cut through pipe, gutters, rusty bolts, hose clamps, sheet metal and a whole lot more. Mandrel 402 is required (sold separately).
    Readmore

    Technical Details

    - Ideal for cutting, grooving and trimming all kinds of metal. May also be used on other materials-including thin wood, plastics and ceramics.
    - Cut-off wheels make it easy to cut bolts or screws or make slots in rusted or stripped bolts and screws for removal with a screwdriver.
    - May also be used on other materials including thin wood, plastics and ceramics.
    See more technical details

    Images Product

    Buy Dremel 456 1-1/2" Reinforced Rotary Tool Cut-Off Wheel - 10 Pack Now
    Buy Dremel 456 1-1/2" Reinforced Rotary Tool Cut-Off Wheel - 10 Pack |
    Cheap Dremel 456 1-1/2" Reinforced Rotary Tool Cut-Off Wheel - 10 Pack | Low Price Dremel 456 1-1/2" Reinforced Rotary Tool Cut-Off Wheel - 10 Pack | Best Dremel 456 1-1/2" Reinforced Rotary Tool Cut-Off Wheel - 10 Pack | Order Dremel 456 1-1/2" Reinforced Rotary Tool Cut-Off Wheel - 10 Pack | Good Dremel 456 1-1/2" Reinforced Rotary Tool Cut-Off Wheel - 10 Pack | Lowest Dremel 456 1-1/2" Reinforced Rotary Tool Cut-Off Wheel - 10 Pack | Save Dremel 456 1-1/2" Reinforced Rotary Tool Cut-Off Wheel - 10 Pack | Discount Dremel 456 1-1/2" Reinforced Rotary Tool Cut-Off Wheel - 10 Pack | Purchase Dremel 456 1-1/2" Reinforced Rotary Tool Cut-Off Wheel - 10 Pack | Shop Dremel 456 1-1/2" Reinforced Rotary Tool Cut-Off Wheel - 10 Pack | Buying Dremel 456 1-1/2" Reinforced Rotary Tool Cut-Off Wheel - 10 Pack | Where Dremel 456 1-1/2" Reinforced Rotary Tool Cut-Off Wheel - 10 Pack

    Thursday, September 9, 2010

    0 Dremel 290-05 120-Volt Industrial Engraver

    Review Dremel 290-05 120-Volt Industrial Engraver


    Buy Cheap Dremel 290-05 120-Volt Industrial Engraver From Here Now!

    290-05 Style: Inc. (3) 9924 Carbide Engraving Points, Price Each This item features: -Stroke adjustment dial regulates engraving depth. -Light and compact design for precision engraving. -Engraves metal, glass, wood, plastic, and ceramics. -Soft grip has been added to provide extra control and comfort. -Packed in a plastic tube. -Voltage: 115.00 VAC. -Frequency: 60.0 Hz. -Cycle Rate: 7200 strokes/min [Max]. -Power Source: Electric. -Wt.: 0.85 lb.
    Readmore

    Technical Details

    - Amperage: 0.2 Amps
    - Hertz: 60 Hz
    - Speed: 7,200 spm
    - Voltage: 115 V AC, 60Hz
    See more technical details
    Customer Buzz
     "High quality, but a bit large" 2009-09-28
    By Moderate American Man (Arizona, USA)
    I have used Inscriblio engravers, poor quality chinese engravers, and now this Dremel engraver. The Dremel is easily the highest quality, and best value. My only complaint is that it's size and shape make it harder to use then the other light weight engravers. However I think I will get used to it, and it seems obvious that it will last much, much longer then either of the other engravers I have used in the past.

    Customer Buzz
     "Very disappointed" 2009-04-22
    By Jamie R. Deem (Orlando, FL)
    I bought this engraver to mark all of my tools with serial numbers and my name. On the very first tool, after engraving the serial number, the diamond tip began to loosen and slip out. I reached for the included little wrench with a standard screwdriver tip on one end to tighten the set screw that holds the diamond tip in the tool. I tried to use the screwdriver tip to tighten the slotted set screw and quickly discovered that the provided tool was too thick to fit into the groove in the set screw. I was a little miffed, but just walked over to a benchtop polishing wheel to remove a small amount of steel from the tool so that it would fit in the screw for which it was made. When I returned to the engraver to tighten the set screw the tool fit perfectly, and with one turn the screw, all the threads stripped out of the tool, not off the set screw. The set screw is just fine, but the metal that was threaded for it to go into is made of a metal so soft that it cannot withstand a single turn of the set screw that is essential to hold the diamond tip in place. I'm still rather incredulous that this tool would be made so poorly; perhaps they had a bad batch that got out on the market. If you already have one, with a soft metal housing for the diamond tip, you might wish to try some Locktite on the set screw and perhaps even the diamond tip where it contacts the soft metal housing. Be sure to take note of the different strengths of Locktite so that the bottle or tube you buy will be effective. My engraver will be going back, and I do not think I will be purchasing any more Dremel products in the near future.

    Customer Buzz
     "good tool" 2008-10-28
    By A. Walk
    I have only used this tool a few times, but it has worked very well.

    I was surprised at how thick of a piece of metal it will make a cut in.

    Customer Buzz
     "great tool" 2008-05-12
    By Licari Woodworking, LLC (ct)
    great little unit! works on all metals including saw blades and router bits. I am using the diamond tip with it. powerfull and not too loud. glad i own it.


    Images Product

    Buy Dremel 290-05 120-Volt Industrial Engraver Now
    Buy Dremel 290-05 120-Volt Industrial Engraver |
    Cheap Dremel 290-05 120-Volt Industrial Engraver | Low Price Dremel 290-05 120-Volt Industrial Engraver | Best Dremel 290-05 120-Volt Industrial Engraver | Order Dremel 290-05 120-Volt Industrial Engraver | Good Dremel 290-05 120-Volt Industrial Engraver | Lowest Dremel 290-05 120-Volt Industrial Engraver | Save Dremel 290-05 120-Volt Industrial Engraver | Discount Dremel 290-05 120-Volt Industrial Engraver | Purchase Dremel 290-05 120-Volt Industrial Engraver | Shop Dremel 290-05 120-Volt Industrial Engraver | Buying Dremel 290-05 120-Volt Industrial Engraver | Where Dremel 290-05 120-Volt Industrial Engraver