Dremmel

Friday, May 28, 2010

0 Dremel 100-N/7 Single Speed Rotary Tool Kit

Review Dremel 100-N/7 Single Speed Rotary Tool Kit

Buy Cheap Dremel 100-N/7 Single Speed Rotary Tool Kit From Here Now!
Lightweight, single speed tool with ball bearing construction allow for cool running, quiet, smooth operation. Specs: Cord length 6', speed 35,000 rpm, voltage 120 AC/50-60 Hz. Includes: Mandrel, coarse 1/2", sanding drum, dressing stone, heavy duty emery cut off wheel, 1/2" 120 grit sanding band, aluminum oxide grinding stone, silicon carbide grinding stone.
Readmore

Technical Details

- Ideal when one speed is all you need
- Single speed control for fulltime 35,000 rpm operation
- Cool-running ball bearing construction for smooth and quiet operation
- Replaceable motor brushes extend tool life
- Lightweight design for comfort during prolonged use
See more technical details
Customer Buzz

"Intitially a problem but Dremel Service was Excellent" 2010-05-21
By Binster (Chicago, IL)
I ordered this tool a couple months ago to replace a 10 yr old Dremel that gave up. Upon setting up and using the tool on my lawn mower blade the the new drill locked up within a minute. I heard a rattling sound inside and thought it was a chipped brush. I took out the brushes and one was chipped and broken.

I replaced the brushes and tried again. The motor gave a very bad sound and locked up again. I took the drill apart and found that one of the copper plates that the brushes touch had broken off.

I emailed Dremel support about the situation. I received a prompt email and was directed to send the unit to the Racine, WI service center with all of my supporting documents.

Within a week I received a new drill. I was very pleased to see such a fast turnaround and courteous service. I promptly set it up and went to town on the lawn mower blade and it didn't skip a beat. I did my neighbor's blade as well. I'm a fan of Dremel for over 10 years and wanted to pass the word about this company.

bk

Customer Buzz

"Nice Tool" 2010-01-07
By F. Miller (Hollywood, MD United States)
My son loves this tool. It's compact, not overly expensive and has multiple uses.

Customer Buzz

"great little tool" 2009-11-21
By David Owens (La Mirada, CA USA)
This is a fixed speed basic small grinder/buffer. It replaced a rechargeable battery model that just stopped working. Dremel offers several collects and bits for this, but they have to be ordered separately.

I was hoping I could also use this for my dogs nails, but it is too loud for her. I am very happy with this well made product.

Customer Buzz

"Dremel 100" 2009-11-18
By David Kolasky (Toledo, OH)
Needed a simple tool to engrave my blown glass objects. Fits the bill, and inexpensive, too! Had the cordless one prior to this, but after a year the cordless one would not hold a charge, even after purchasing a new charger.

Images Product

0 Dremel DRE686 Sanding/Grinding Kit

Review Dremel DRE686 Sanding/Grinding Kit

Buy Cheap Dremel DRE686 Sanding/Grinding Kit From Here Now!
The Dremel 686-01 31-Piece Sanding & Grinding Set is ready to show you the true potential of your Dremel Rotary Tool. The Dremel 686-01 31-Piece Sanding & Grinding Set comes with all of the accessories to handle your sanding and grinding needs, just add your Dremel or similar rotary tool. Durable, reusable storage case with 3 dividers to set up individualized compartments. Set Includes: 1) No 84922 grinding stone 1) No 85422 grinding stone 1) No 8193 grinding stone 1) No 932 grinding stone 1) No 511 abrasive buffs 1) No 426 cut-off wheel 4) No 408 sanding bands 4) No 432 sanding bands 15) No 412 sanding disc 1) No 407 drum sander 1) No 402 mandrel
Readmore

Technical Details

- 31 Accessories
- Reusable case
- Dividers for 3 case compartments
- 0
See more technical details
Customer Buzz

"Dremel" 2009-11-30
By Norman Girard (CT - USA)
The best item for so many jobs. It is very versatile like no other tool.

Good price, good quality and lasting power and does a great job when control is required in the type of work done.

One caveat, DO NOT buy the battery powered piece of junk, as it just burns out quicker than a firecracker.

Spend a bit more on the plug in and it will be worth the extra cost.

Customer Buzz

"Perfect!" 2009-09-12
By Jouetcat (Quincy)
This is one of the accessory kits that I ordered with my new cordless Dremel. They are perfect for my needs. I am a beginning sculptor and am using these bits to help me shape my soapstone pieces. They make short work of cutting through the tough stone.

I also intend to use these attachments for household repairs, refinishing furniture and general cleaning and polishing.

I would insert a photo of one of my sculptures but don't see a way to do it here!

Dremel DRE686 Sanding/Grinding Kit

Customer Buzz

"Very okay" 2009-08-11
By Jan (St. Louis, MO)
I guess I expected more from this tool. I really thought I would be using it for all kinds of different tasks around the house. I have found, however, that I seldom use it and that's a bit disappointing to me. It goes through the charge fast. I doubt I would repurchase, but perhaps that's just because I don't have a lot of uses for it. I suppose my advice would be to truly analyze what your needs are. Although the Dremel does a lot, you simply just may not need it.

Images Product

0 Black & Decker RTX-6 2 Amp 3-Speed Rotary Tool with 30 Accessories and 2 Spring Clamps

Review Black & Decker RTX-6 2 Amp 3-Speed Rotary Tool with 30 Accessories and 2 Spring Clamps

Buy Cheap Black & Decker RTX-6 2 Amp 3-Speed Rotary Tool with 30 Accessories and 2 Spring Clamps From Here Now!
The Black & Decker 3-speed rotary tool is created with a high-torque 2 amp motor so it finishes jobs quickly and efficiently -- without bogging down under the load. Versatile, rugged, and loaded with convenience features, this hardy rotary tool will make short work of all your fine detail jobs, craft projects, workshop and household tasks.

The RTX-6 boasts an exclusive Flip-Lock spindle lock system for quick and easy accessory changes, eliminating the need to hold down an awkward button as you try to switch heads. And you'll have a lot of heads to choose from -- because the universal collet system accepts all standard rotary tool accessories. So don't worry about buying special bits, tips, or attachments. This tool accepts any rotary tool add-on you can think of, so the number of potential applications is almost limitless.

This outstanding tool offers three speed settings for maximum precision and versatility, no matter the project. With speeds -- 12,000/24,000/30,000 rpm -- you can customize the power to the project at hand; and the separate 3-speed dial means you can set it and forget about it. Also, the rubber overmolded grip keeps your hands comfortable and your accuracy high, because a tool that's easy to hold is easy to maneuver. This kit includes 27 accessories, 2 clamps, and a soft bag to keep it all together and organized. -- Cherie Priest

Applications:
The RTX-6 is ideal for an immense variety of jobs. It cuts, sands, grinds and carves; it cleans, polishes, engraves, sharpens and drills. This rotary tool smoothes and shapes work pieces, removes rust and corrosion from old metal, and even creates drywall cut-outs. Use it around the home, in the workshop, or anywhere else.

What's in the box:
Black & Decker rotary tool, 27 accessories plus the 2 clamps, soft-sided bag with accessory compartment, user guide, and wrench.
Readmore

Technical Details

- Rotary tool includes 30 accessories to perform wide variety of task
- 2 Amp, high torque motor provides superior power
- 3 adjustable speeds (12,000/24,000/30,000 RPM) for precision work
- Flip-Lock system makes for quick and easy accessory change outs
- 2-year warranty
See more technical details
Customer Buzz

"Good Buy" 2010-05-13
By Shirley R. Nichols
This is a good Rotary tool I'm happy with it and the price was a factor and it is as good as Dremel. I've had a Dremel brand it was a lot more expensive but worked no better then the Black and Decker model. I'm very pleased with it and I saved money too.

Customer Buzz

"A computer modders must!!!" 2010-05-03
By Richard Kowalski (buffalo ny)
Okay well i've been a computer and xbox 360 modder for about 2 years almost and wow i must say ive used alot of rotary tools in the past and this is KICK ASS!!! Better then the brand dremal this thing with a diamond cutting disk was ripping threw the steel of my case and is a wonderful thing!!! almost complant no extra size attatchments....had to but a wider post so use my buffer wheel on but hey for like 40 bucks its a steal!!!

Customer Buzz

"Black and Decker Rotary Tool" 2010-03-26
By Peter Hense (Dallas, TX)
The product itself is fine however the photo and the advertisement of multiple accessories was misleading. The 20 plus accesories were only multiple sanding discs however you were lead to believe they were additional bits. As for the carrying case, as you can see from the photo and what you got were totally different. What you see on the photo is a carrycase that folded, what I got was a vinyl pouch.

Customer Buzz

"Better than Dremmel" 2010-02-21
By Dennis T (Cincinnati, Oh)
This tool was purchased to replace a Dremel which always ran hot until the motor finally burned out. Although this tool comes in a bag not the case as shown the tool itself is dynamite. There are 3 fixed speed settings adequate for most tasks. By comparison the B&D is much quieter and also seems to have more power even at the slowest speed. Bits and collets are interchangeable with Dremel. The chuck can be tightened by hand or with a wrench. The only real negative is placement of the spindle/motor lock, just in front of the power switch.

In short, a good tool at a good price!

Customer Buzz

"Too soon to tell" 2010-02-12
By Carol J. Faith (MICHIGAN)
I have not had a chance to really use it yet. I purchased it on the suggestion of my teacher for a jewelry class I will be taking Feb. 27 and 28. In fact I have not gotten the accessories that I will need for the class. If I like using this rotary

tool I plan to either get the Flex shaft attachment or purchase a Foredom Flex shaft.

This however, seams like a good inexpensive way to see if I like using a tool or if I prefer doing everything by hand.

Images Product

0 Dremel EZ406 1 1/2-Inch EZ Lock Rotary Tool Cut-Off Wheel and Mandrel Metal Cutting Starter Kit

Review Dremel EZ406 1 1/2-Inch EZ Lock Rotary Tool Cut-Off Wheel and Mandrel Metal Cutting Starter Kit

Buy Cheap Dremel EZ406 1 1/2-Inch EZ Lock Rotary Tool Cut-Off Wheel and Mandrel Metal Cutting Starter Kit From Here Now!
The Dremel EZ Lock makes accessory changes easy as pull, twist, and release. The 1 piece mandrel design simplifies the process of changing cutting wheels and makes it easy to cut through a range of materials from metal to plastic. Eliminates the need for
Readmore

Technical Details

- Faster accessory change easy as 1, 2, 3!
- Use for cutting metal
- EZ Lock Cut-off Wheels last 2 times longer
- Cut-off Wheels labeled for quick identification
- One-piece mandrel design with no screw needed
See more technical details
Customer Buzz

"Nothing I can't cut" 2010-05-19
By J. Kearney (Exeter, PA USA)
Will cut until it's down to the nub. Love this thing. Make sure if you have a battery operated drill, like I do, that it is fully charged, though.

Customer Buzz

"Dremel Rotary Tool" 2010-04-16
By R. J. Melton (Arizona)
I ordered this part, so I could use it on my Chevy truck. I'm installing a floor shifter for my auto tranny, and needed this to cut off part of my center console so the shifter would fit. It was like a hot knife thru butter. It cuts metal, but I used it for plastic. I also cut off a bolt head that was stripped and once again, went right on thru it. Great price and great accessory for your dremel, you should get one, it's amazing...

Customer Buzz

"Must have" 2010-03-06
By Dan (NY)
If your like me, then you have used metal cut-off wheels from Dremel for years with frustration. This cut off wheel is different. It's thicker, and its strong, and it's very fast to change out. You will find yourself changing wheels because they have worn down, and NOT because they have shattered. When I originally purchased my Dremel, it was with the purpose of making quick, accurate cuts in small metal. With this product, I can finally do that without replacing a broken wheel every 2 minutes.

Customer Buzz

"Better than advertised" 2010-01-25
By Zbigniew Bobinski (Bakersfield, CA USA)
Working on my boat, I was extensively using battery operated Dremel tool. As batteries for Dremels were improving over the years significantly, with last generation of Lithium giving amazing performance, the standard cutting wheels were a constant source of my frustration. Easily turning into dust under heavier loads, and breaking into flying pieces well too easily. As they were the only available type, I was buying them in large quantities and accepting what was available on the market. One day surfing Internet, I found this starter set. Starter, because a new quick connection system is using different disk holder which is included in the kit. I found in other reviews, that disk life is about two times longer as different type of material, closer to one used in big grinders is used. In my opinion it's a great understatement. This is completely different animal. It doesn't break easily, so the small misalignment in the cutting gap doesn't make it disintegrating momentarily. It's so strong, that it rather stops Dremel from turning. It's resistance to wear off is probably about 5 times or more bigger, to compare with standard brittle cutting disks. Last 6 months or so I use them exclusively for comfort of use, and I believe I'm saving money too.

Customer Buzz

"must have attachment for dremel" 2009-12-21
By Raymond Garces
I have this attachment for my rotary tool. I used it to remove pipes that I could not get a pipe cutter on. It's a great attachment.

Images Product

Sunday, May 9, 2010

0 Dremel MS400 MultiSaw Attachment

Review Dremel MS400 MultiSaw Attachment

Buy Cheap Dremel MS400 MultiSaw Attachment From Here Now!
Designed exclusively for the Dremel® 400 Series XPR rotary tool to perform precision cutting in hard-to-reach areas. Balanced and comfortable, the XPR MultiSaw's compact size makes it ideal for cutting in spaces where other saws can't reach.
Readmore

Technical Details

- Universal blade holder for optimal versatility
- Uses U and T shank blades for a variety of applications
- Features 3/8-inch blade stroke for fast and controllable cutting
- Cuts materials up to 1-1/2-inch thick with supplied blade for cutting applications large and small
- 5-year warranty for increased reliability
See more technical details
Customer Buzz

"Don't expect too much." 2009-11-11
By AWBoater (USA)
I was very disappointed in this tool. I bought it to cut out a 12" x 6" panel in 1/4" thick fiberglass with 1/16" aluminum on one surface. Since it used standard jig saw blades, I figured it would be up to the task.

The primary reason I used this item rather than a jig saw is that I had a restricted area where the jig saw would not fit.

It made it about half way through the job when it quit working. When I disassembled it, I found it had nylon (or perhaps simply plastic) gears, which were rounded smooth. The manual does caution against running the tool too fast, and I did heed that, but its supposed to be able to cut through 1 1/2" material, so I figured it should have worked for my application. But at any rate, for almost $30, it should have metal gears.

Unless you are cutting thin or soft material, get something heftier, like a pneumatic saw.

Customer Buzz

"Good concept. Poor carry through." 2009-10-27
By W. Johnson
This is a replacement. My old one worked great, but a part broke and I was forced to buy a whole new replacement. No parts are avalable.

Customer Buzz

"Useless." 2009-07-02
By R. Duterte (New Brunswick, NJ United States)
I've tried using this saw on multiple occasions with multiple materials, and it's just useless. Originally, I thought it was my own fault, attempting to cut some pretty thick plywood. But I recently attempted to cut plywood that was maybe an 1/8" thick and it took forever. I finally gave up and went to Lowes to buy a HAND coping saw, and it was much faster.

I know it's less than $20 here, but I think you're better off getting a dedicated jigsaw.

Customer Buzz

"Nice attachment, but not as usefull as advertised" 2009-05-09
By Ravenant211 (Upland, CA USA)
I bought this from a local Lowe's when I bought my XPR400 Dremel tool. I was building a guitar amp cabinet actually and just wanted something to make a few straight cuts in some smaller sections of plywood. This seemed adequate based off it's list of features and claimed abilities. I didn't expect it to do as well as a powered jigsaw for example but figured that it would do well enough for my limited needs. I also needed to make 4 rounded corner cuts and since it claimed to be able to do this that convinced me to try it.

The piece assembled easily and with no fuss. It started up and functions like it should mechanically. The problem is that it just lacks the needed amount of power to perform to the standard it claims. I turned it up to it's maximum and it wouldn't even get a quarter of an inch into the plywood before the dremel would start to overheat and slow down. I let it do this twice, the second time it slowed down almost to a stop and the whole unit felt VERY hot to the touch. I decided not to risk it after that as I didn't want to damage the dremel. I was very careful to not cover up the air vents on either piece. I held it with both hands as directed and the wood was very securely clamped down. I also proceeded slowly and tried to let the tool do the work, it would never grab and cut on it's own though. Plywood is not a hard wood and should not be difficult to cut with a jigsaw attachment.

I ended up just going back to Lowe's and buying a powered jigsaw. It cut the plywood like butter, was able to do the rounded corners like I needed and was not that much more expensive than this unit in the store.

The dremel tool works great for it's intended uses, I even used the dremel to smooth out the rounded corners I cut with the jigsaw. This attachment however is very lacking. It may perform well with very thin sheets of wood or metal or perhaps with something like particle board or drywall. I decided to keep it despite the lack of performance because I do have to cut drywall occasionally and so this may come in handy. I will try it out next time to see if it has any uses at all.

I decided to give it two stars because the tool may work well for lighter duty uses that I haven't tried it with yet, but it's definitely not able to do what the packaging information claims. Unless you need something for small projects with light materials save your money and just buy a powered jigsaw, you probably won't have to pay that much more than you would for this!

Customer Buzz

"Good if you do not already have a jigsaw." 2009-03-25
By Dave (Franklin, TN)
I have only used this attachment once. It worked fine but when you attach it to the Dremel tool you end up with a tool that is quite high and a little awkward. If you plan to use this attachment a lot, you should first consider a full size jigsaw. Also, this attachment only works with the Dremel 400 XPR. I think you could buy a full size jigsaw for less than buying the 400 XPR with the MultiSaw attachment. However, Dremel makes a small planer for use with the 400 XPR that is quite handy. So, if you were going to buy a 400 XPR, the MultiSaw attachment and the planer would be reasonable additions. Also, I think Dremel made a mistake by making attachments that only work with one model of tools. By doing so, they are missing a big piece of their own market by not designing an attachment that will work with all of their tools. If this attachment worked on all of the Dremel tools I would have rated it with 4 stars.

Images Product

Saturday, May 8, 2010

0 Dremel 335-01 Plunge Router Attachment

Review Dremel 335-01 Plunge Router Attachment

Buy Cheap Dremel 335-01 Plunge Router Attachment From Here Now!
Use with Dremel rotary tool to shape edges, cut rabbets, dadoes, mortise, tongue and groove, etc. Use freehand to carve letters, patterns, etc. 2 depth stops with quick release for rapid adjustment of routing depth. Double handle design for greater contro
Readmore

Technical Details

- Plunge router attachment for Dremel rotary tool models 400, 398, 395, 300, 285, and 275
- Quickly converts rotary tool to plunge router; plunge lock-in handle; 2 depth stops for rapid depth adjustments
- Plastic and metal construction
- Includes plunge router attachment, edge guide, circle cutting guide, mounting wrench, manual
- 6 by 5-1/2 inches; 1-year warranty
See more technical details
Customer Buzz

"DOES work with Dremel 10.8V Li Ion cordless" 2010-04-30
By ISaidThat (USA)
It turns out that this DOES work with the Dremel 10.8 v Li Ion model (AKA, the 800 or 8000 model)! The literature that came with my cordless Dremel claimed that the two don't work together. However, I nervously purchased the plunge router attachment from a Home Depot which was advertising the two as working together and it turns out that they do! I just tried it and the cordless model screwed into the attachment perfectly. I routed several grooves successfully using the plunge router and the included edge guide.

My biggest complaint is the following: The clamps that secure the edge guide are not very secure, so the guide slowly slipped without my realizing it, resulting in about a 1-2 mm difference in the location of the groove I was cutting between start and finish on one piece of wood. Once I knew that this was I risk, I was just very careful to tighten all the clamps as much as I possibly could and it didn't happen again.

It would also be nice to have an easier method of adjusting and measuring the depth and distance along the edge guide without having to use external measurement tools.

Make sure you take note of the depth lock on the handle. It's very useful for locking in a depth without having to hold down the router against the springs.

Other than that, it works as I would expect it to and I'm pleased with my purchase. Although I have the router bit collection, I so far have only used the attachment with one of the high speed carving bits to make a pencil thin decorative groove in the edge of a picture frame. I was only using basswood, so I can't say how it would stand up to a more strenuous challenge.

Customer Buzz

"Nice idea, doesn't really work" 2010-04-29
By Andrew Jackson (MD, USA)
This attachment sounded perfect for the model making and dolls' house building I want to do. Thought I'd be able to do some nice box joints with an appropriate jig. Some problems - (1) you can't use standard screw in guide bushings, (2) even if you could get the bit centered on the base, it moves when you cut, so you get wiggly cuts, even with the edge guide (this is presumably why they don't give you guide bushings with any kind of tolerance).

Save you money towards a real router.

Customer Buzz

"Time saver" 2010-04-28
By Richard E. Theobald
Compared to some other Plunge Router attachments for Rotary tools I had looked at this one was the best,better construction,ease of use,& smaller in size making easer to work with.

Customer Buzz

"DO NOT PURCHASE" 2010-04-09
By T. Turner (South Carolina)
I have been a long-time Dremel user and supporter. I purchased this router with expectations of being able to make simple use of it. I tried routing a shelving board that was white pine (very soft) and I was fighting the router the entire time. I had it set to cut a certain distance from the edge with the guide and the guide kept slipping no matter how hard I tightened it. One problem causing this was because I had to put so much pressure to plunge the router down. The springs are too strong and I am a tough guy. No way my fiance could have pushed the plunger of this thing down. I was focusing on pushing it down so much that my other resulting forces were moving it from the tightened guide. I WOULD NOT RECOMMEND this product. The frustration will just ruin your work and your motivation. Spend the extra money and buy an actual router for cheap....much, much better.

Customer Buzz

"dremel plunge router" 2010-01-27
By Charles H. Morris
well constructed, easy to attach and operate, small size makes it ideal for many projects that would not be done without it

Images Product

Dremmel

Friday, May 28, 2010

0 Dremel 100-N/7 Single Speed Rotary Tool Kit

Technical Details

0 Dremel DRE686 Sanding/Grinding Kit

Technical Details

0 Black & Decker RTX-6 2 Amp 3-Speed Rotary Tool with 30 Accessories and 2 Spring Clamps

Technical Details

0 Dremel EZ406 1 1/2-Inch EZ Lock Rotary Tool Cut-Off Wheel and Mandrel Metal Cutting Starter Kit

Technical Details

Sunday, May 9, 2010

0 Dremel MS400 MultiSaw Attachment

Technical Details

Saturday, May 8, 2010

0 Dremel 335-01 Plunge Router Attachment

Technical Details

All Best Prices

Labels