Friday, March 19, 2010

0 Dremel 335-01 Plunge Router Attachment

Review Dremel 335-01 Plunge Router Attachment


Buy Cheap Dremel 335-01 Plunge Router Attachment From Here Now!

Use with Dremel rotary tool to shape edges, cut rabbets, dadoes, mortise, tongue and groove, etc. Use freehand to carve letters, patterns, etc. 2 depth stops with quick release for rapid adjustment of routing depth. Double handle design for greater contro
Readmore

Technical Details

- Plunge router attachment for Dremel rotary tool models 400, 398, 395, 300, 285, and 275
- Quickly converts rotary tool to plunge router; plunge lock-in handle; 2 depth stops for rapid depth adjustments
- Plastic and metal construction
- Includes plunge router attachment, edge guide, circle cutting guide, mounting wrench, manual
- 6 by 5-1/2 inches; 1-year warranty
See more technical details
Customer Buzz
 "dremel plunge router" 2010-01-27
By Charles H. Morris
well constructed, easy to attach and operate, small size makes it ideal for many projects that would not be done without it

Customer Buzz
 "Dremel Plunge Router Attachment" 2009-12-26
By Funman (Iowa USA)
I love this addition to the Dremel system. Only 2 downfalls on this addon. The depth is a little hard to control and make the small depth changes I do. The second downfall is the limitation of router bits that you can use. The MAJOR plus to this addition and tool is the smallness of the product. Other routers cannot do the small bits that are available with the Dremel system. You can do VERY intricate designs. I love using this tool and the Dremel system.

Customer Buzz
 "Depth Setting Unreliable" 2009-10-25
By Charles D. (St. Augustine, FL United States)
The Dremel 335-01 plunge router base does work as advertised, up to a point. It does turn the Dremel tool into a small lightweight router. Side to side motion is easy to control, and freehand routing is possibile with this base. It could also serve as a tool holder for other applications, e.g., grinding.



I bought the plunge router base for inlay work. I intended to use it to clean out the recess for the inlay. It can be used for that purpose, but barely. The depth adjustment requires fussy trial and error, and once set is still imprecise & unreliable. The base is made of plastic and is too flexible. Therefore, the depth stop cannot control the depth of cut. As a consequence, the plunge feature is useless for precise work.



This a major problem for inlay that is, for example, 1/32" thick. The depth stop has to be adjustable to within 1/64" or so, to leave the inlay a bit proud, so it can be smoothed flush with the workpiece.



I cannot rely on this tool for inlay work. Inlay is the last step before finishing, and there is a lot of time and money into the workpiece by that step. A ruined recess could mean a ruined workpiece. Instead, I use a Veritas Router Plane (a hand tool). It is very precise and stable. People looking for a power tool for precise inlay work should consider the Stewart-MacDonald base. It costs twice as much, and is not a plunge base, but apparently it can be adjusted precisely.



If precise depth adjustment is important to you, keep looking.

Customer Buzz
 "Nice Attachment" 2009-10-21
By Monkey Dad (El Cerrito, CA)
Fast Shipping. Not the most sturdy construction, but good enough for the type of small things you do with a Dremel. Easy to put the tool in the attachment, but not always easy to get the bits in and out while assembled depending on the orientation of the chuck when locked. The height adjustment is a little awkward.

Customer Buzz
 "Does not meet expectations" 2009-09-16
By T. Wagus (Kandahar, Afghanistan)
Purchased this for use while deployed to Afghanistan, hoping that it would make it so that my Dremel could do the job of a full-size router. As difficult as it is to get tools and hardware over here, I try to make do with what I have or modifying tools to do multiple jobs. My Dremel has come through for me performing many functions. Sadly, router isn't and may never be one of those functions. This attachment is awkward at best - it is nearly impossible to tighten the collet with the standard mini-wrench for the tool and no amount of tightening seems able to keep the bits in place. I was attempting to notch a 2x4 for a project and nearly ended up cutting the board in half. I resorted to repeatedly plunging the bit into the area I wanted to remove over and over but then ended up having to make the cut with a circular saw and knocking out the wood with an old screwdriver and hammer. I realize now that the Dremel just doesn't posess the power or size to make this a useful attachment option unless maybe you are working with balsa.


Images Product

Buy Dremel 335-01 Plunge Router Attachment Now
Buy Dremel 335-01 Plunge Router Attachment |
Cheap Dremel 335-01 Plunge Router Attachment | Low Price Dremel 335-01 Plunge Router Attachment | Best Dremel 335-01 Plunge Router Attachment | Order Dremel 335-01 Plunge Router Attachment | Good Dremel 335-01 Plunge Router Attachment | Lowest Dremel 335-01 Plunge Router Attachment | Save Dremel 335-01 Plunge Router Attachment | Discount Dremel 335-01 Plunge Router Attachment | Purchase Dremel 335-01 Plunge Router Attachment | Shop Dremel 335-01 Plunge Router Attachment | Buying Dremel 335-01 Plunge Router Attachment | Where Dremel 335-01 Plunge Router Attachment

0 comments:

Post a Comment